SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 
 |  Latest Topics
 
 
 


Reply
  Author   Comment  
niceone
Reply with quote  #1 
what shoots best in yours any one tried 30-35 berger ? what load data do you have ..............
kory
Reply with quote  #2 
niceone,

I wasn't sure if you were asking just about bergers or any 20 cal pill. My favorite load is 23.5 grains of H4198 and a 32 grain Hirnady V-Max. I can shoot three of them into one ragged hole. I use IMI brass exclusively. This particular rifle has a Lilja 1:12 twist.

I don't know if you've seen this article, but there are some good Tac-20 loads in the Tac-20 section near the end of the article:

http://www.6mmbr.com/20Caliber.html

Let me know if you have any further questions.

Regards,
Kory
niceone
Reply with quote  #3 
do you use the 10 X at all
slewfoot
Reply with quote  #4 
I have a Lilja 1-11 twist My best ( most acc.) load is 24.2- Vih 133 Dakota brass 7.5 Rem. shoots in 2,s I tried about 20 different test loads. Allen
lou
Reply with quote  #5 
25.3 gr varget with a berger 40gr
shot a 1600 agg. at 100yds in visalia with it and going to shoot
the new IMR8208XBR with 40 gr berger end of the month in visalia.
20-220 russian bartlein barrel
Geno54
Reply with quote  #6 
40 Grain Berger BT Varmint Match bullets (lot 1342) seated
to 2.270 OAL using Dakota Lapua brass with CCI 450 primers.
Bullets & cases weight sorted, powder thrown from Harrels
measure.

24.8 grains N-133 5 shot 3 group agg = .309 smallest = .140

25.0 grains N-133 5 shot 3 group agg = .548 smallest = .482

25.2 grains N-133 5 shot 3 group agg = .641 smallest = .458


Same as above except using 24.8 grains of Benchmark, all components but primers
weight matched. I measured the raw group anywhere from
.417 to .419 at 200 yards

Looks like slew & I found a similiar sweet spot for respective rifles with N-133, he at 24.2, mine at 24.8, I have a 1/12 Shilen select and used CCI 450's.


Reduce your starters to be safe!!!!

PS I am working with 10X now also,.... too early to report however.
nmiller
Reply with quote  #7 
My favorite load for my boltgun Tac .20 is 32 gr V-max with 25.5 gr Re 10X lit by CCI BR4s. Bergers may shoot better in it but V-maxes are cheaper for PDs. My .20 PPC likes 40 gr Bergers best with VV N-133. I shoot 32 gr. V-maxes over 27 gr. TAC in my Ar-15 Tac .20
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum