Reply with quote #1
I just received my 20br and am working on brass prep. The brass chambers a little on the tight side. I believe it is due to the fact that the bushings will not size all the way to the neck shoulder junction. Is it safe to shoot like this? I size with 22br seater first then 22br f/l with all guts removed then .235 bushing then .231 bushing trim to 1.540(may back down to 1.535).
Reply with quote #2
If the part of the neck that seats the bullet has clearance so that the bullet releases, you are fine (ie don't seat your bullets deep into that area). The unsized part the neck will fireform nicely, some folks like for this area to be tight on first firing to protect the brass from head space issues. Good luck, you will enjoy that 20BR!
Reply with quote #3
Ok. Thanks. I am excited to shoot it but want to be safe.
Reply with quote #4
So how did you get on with it?