SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 
 |  Latest Topics
 
 
 


Reply
  Author   Comment  
AWLEAPHART
Reply with quote  #1 
I need a little advice here. I have a 25-06 with the neck chambered at .290 and a load round at .284 with Winchester brass. The brass neck thickness is inconsistent, so turning the neck to me may be out of the question. When trying to neck size the brass, seating pressures fluctuate due to the neck thickness. Do you think it would be good to resize the brass and get an expander mandrel made around .255 and expand the neck back up then seat the bullets? I was thinking that with there being .005 from chamber to loaded round that neck thickness would not hurt accuracy. Thanks Alot for your time. Anthony
alf
Reply with quote  #2 
I tried the different expander route once. It just added another step to the loading process and induced too much runout on the brass.

If you anneal your brass after ever firing I think you'll find more consistant neck tension.

I think your best bet is to buy 30-06 brass, neck them to 25, and neck turn them. You'll end up with fatter, more consistant necks. I'd still anneal and use your regular die with the expander.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum