SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 
 |  Latest Topics
 
 
 


Reply
  Author   Comment   Page 4 of 4      Prev   1   2   3   4
omahaguy
Reply with quote  #25 
hey guys I just got my long action standard opened up to a 300 wsm I chose a long action so I can seat the bullet out far and still mag feed it, I have some cci br2, reloader22, win brass, 208gr a-max, I want a little extra room before it touches the lands can someone recommend a reamer, the bullet seated farther out will give me more powder capacity, my other question is can someone recommend a good start load for the 208 since I cant find any, according to a friend of mine on here they are very close to the 210's but I cant find any 210 info with re22 powder, are H4831 or H4350 close enough to Re22 burn rate to swap info?
I have only heard good things about the cci br2, are they really that much better then say the wlr to justify the extra $20 per 1000?

Thank you all
Jerry M.

after I finally work a good load I will post it for every one...
britz
Reply with quote  #26 
You can never swap loading information from one powder to the next. R22 isn't the best powder for the wsm imho. R19, R17, H4350, or H 4831 are better powders for this rifle.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum