SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 
 |  Latest Topics
 
 
 


Reply
  Author   Comment  
cockcroft
Reply with quote  #1 
I have a 6 ppc built on a Hart action and barrel with less than 300 rounds down barrel. I decided I did not want to shoot 100 and 200 yd. benchrest. Any reason why I can't run a 6mm BR Norma reamer into barrel and enlarge bolt face to accept 6mm BR cartridge? I don't want to deal with 220 Russian brass and neck turning anymore.
Thanks
Mike Cockcroft
Wild_Bill
Reply with quote  #2 
You can dot hat easily just get your gunsmith to re chamber it and open the bolt face if required some benchrest actions will feed both but you will still be limited to bullets up to about 80gr depending on your twist.

Cheers Bill
Australia
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum