SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 
 |  Latest Topics
 
 
 


Reply
  Author   Comment  
long40shot
Reply with quote  #1 
Is it possible to covert a Rem 700 ADL into a BDL. I didn't know if I found some bottom metal if it would just bolt on with a new stock.

Thanks-
Matt
LHSMITH
Reply with quote  #2 
Yes
fanuke
Reply with quote  #3 
To properly convert from an 700 ADL to a BDL, you will need the following:

BDL stock
BDL floorplate
BDL magazine box - It's shorter than an ADL.
BDL magazine spring - It's flat on the bottom where it slides into the floorplate recess. An ADL spring has an upswept bend at the tip where it sits in the bottom of the stock. In a pinch, you can straighten the bend and use the ADL spring.
Receiver Screws - Depending on the stock design, you may need longer or shorter screws.

Good luck with the swap!

Rich
BikeEffects
Reply with quote  #4 
I did this years ago and it turned out great. I did NOT get a new stock. Just used the original.
long40shot
Reply with quote  #5 
thanks fellas, i will have to check it out
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum