SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 
 |  Latest Topics
 
 
 


Reply
  Author   Comment   Page 2 of 2      Prev   1   2
mackr
Reply with quote  #9 
You have a bedding problem, even if one load shoots OK today there is no guarantee it will tommorow until the barreled action is in the same place each shot.
Mack
skeetlee
Reply with quote  #10 
That's what i was thinking. I choose not to bed this rifle as i was hoping the aluminum blocks in the stock would be enough. While taking the barreled action out of the stock i can feel it move as i loosen the bottom screw. I will shoot some more of the 66gr bullets to see how they do, and i will make the decision from there if i will have the stock beaded or not. Like i said i was hoping to get away with not doing so and saving the cash. The rifle is still shooting just a touch over .5" agg and is plenty accurate to kill coyotes. Will see. I hate having half ass rifles though. I usually feel like if i spent this much whats another 150 bucks. But then again i have two kids that always need something. Decisions decisions!!!! Thanks fellas. Lee
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum