SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 
 |  Latest Topics
 
 
 


Reply
  Author   Comment  
IDRACCA
Reply with quote  #1 
Can any body give me any tips on installing a Mauser 98-extractor collar? It is the split ring on the bolt that the extractor slides over. I am aware of the " bolt extractor pliers" that are available through Brownells etc. but these are for installing the extractor on to the extractor collar. I need to install the extractor collar itself. Is there a special tool for this or any tricks to keep from springing the ring when trying to replace it onto the bolt? Any help would be much appreciated! Thanks!
IDRACCA
Cheechako
Reply with quote  #2 
IDRA

There may be a special tool made just for this purpose but I'm not aware of one and I doubt if it would be free. Since this is a once or twice in a lifetime operation, do what I do - simply open the ring until it will slide over the bolt body. It should be soft enough that nothing will be harmed. The same procedure can be used for similar bolts such as the old M70 and the 03 Springfield.

JMHO

Ray
swd
Reply with quote  #3 
You just spread the collar apart with your thumbs and pop it over the grove on the bolt. Then use the extractor pliers to clamp it together to slide the extractor into place.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum