Reply with quote #9
First off, thanks to all of those who responded to my post, I really appreciate all the info and suggestions. I was finally able to get ahold of some ammo and got to the range the other day to do some testing. The ammo I was testing was Black Hills New 40g vmax, Black Hills Remanufactured 50g vmax, and Black Hills New 69g Sierra Matchking. Although the 40g and 69g grouped really well, out to 200yds I had my best 3 shot group with the Reman 50g vmax. A couple of questions. First off, when measuring "group" size, do you measure from the outside of the holes measuring the two farthest points or do you measure from the center of the bullet hole? My best group from outside to outside at 200yds was 1.25 inches, which I was really happy with. My next question, because I didn't get to the range untill late, I didn't have time to do as much testing at 200 - 300 yds as I would have liked. At 200yds if I am 2.25 inches low, with a scope with 1/4 moa adjustments at 100 yds, would I need to go 9 clicks up to account for the 2.25 inches or is it only 4 since my understanding is at 200 yds my 1/4 moa clicks now are actually 1/2 inch adjustments? Thanks again for all the help and happy shooting!!
Reply with quote #10
hello,just sight it in at 1 1/2 heigh at 100 annd it should be zero at 200.to your question.1/4 moa at 100 scopes move up a 1/4 every 100 you go up.100=1/4,200=1/2,300=3/4,400=1",500=1 1/4,and so on.hope this helps.