SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 
 |  Latest Topics
 
 
 


Reply
  Author   Comment  
lancexxx
Reply with quote  #1 
Thinking of building a 6mm dasher on savage target action just for playing with on the bench and for a little varmit hunting. Any thoughts or comments on this.
milanuk
Reply with quote  #2 
I have a 6 Dasher built on a RBLP Target Action... though mine was built for target shooting at distance, so it has a fast twist and throated accordingly.

I'd highly recommend sending the bolt off to Gre-Tan Rifles to have the firing pin hole bushed - the stock firing pin hole tends to have some excess space around it (most factory actions do) which leads to premature primer cratering with even mild loads in 6mm BR & 6 Dasher. Gre-Tan drills out the hole, welds in a plug, faces it, drills & reams a new hole, and then turns the firing pin to fit. Roughly $65 and takes about a week, round trip from your door to his and back again. Well worth it, IMHO.

Good luck on your project,

Monte
NorthFork
Reply with quote  #3 
If you are going to use it just for fun i would build a 6br with a no turn neck.That way you don't have to go though the hassle of firer forming your brass.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum