SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 
 |  Latest Topics
 
 
 


Reply
  Author   Comment  
dan2116
Reply with quote  #1 
I wanted to ask if anyone has used the Score High Benchrest Follower that just fits in a stock on top of the original follower and spring.I did not want to put a permanent follower in the gun which is a short action .221 700 BDL. How do they fix in place and are they a solid stay put application?Thanks all.
walkertexasranger
Reply with quote  #2 
They take about 5 seconds to insert, just open the bdl bottom and insert above the follower and close er up.

They work great, one of the best $12 you will spend!

fdshuster
Reply with quote  #3 
Dan: Yes, I agree with Mark: they work fine. Have them "both ways": sitting on top of the spring assembly, easily removable for conversion back to repeater, and also work fine when glued-in for a "permanent" single-shot set-up. Even my 6 BRs will smoothly chamber feed after simply laying the round on top of the follower & closing the bolt, on my Rem 700s.
alf
Reply with quote  #4 
Score Highs work great, but Davidson's loading ramps work better for glue ins.
Cheechako
Reply with quote  #5 
The Score High is not much of an improvement over simply placing the cartridge on top of the follower. The Davidson is a much better set-up. Just because you glue it in doesn't make it permanent. It can be popped out anytime you want.

JMHO

Ray
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum