SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 
 |  Latest Topics
 
 
 


Reply
  Author   Comment   Page 2 of 33      Prev   1   2   3   4   5   Next   »
shcal
Reply with quote  #9 
Hello everyone, I live on the central coast of California and like to shoot ground squirrels. I shoot 22-250 AI with an 8" twist barrel and a 6PPC HV. This site is great. Thinking of adding a barrel to the PPC rig in 6mmBR with an 8" twist for the heavier bullets. When it stops raining here I'll be shooting the little critters in the 100yd to 500yd range to help out the ranchers. Keep up the good work!
mdlandolfi
Reply with quote  #10 
Hi, I am new to the forum. I recently bought a Tubb 2000 and have acquired one of his 6BR barrels. I can't wait to try it out.

I got inetrested in the 6BR by reading the postings and articles on this forum.


Mike
DSpringthorpe
Reply with quote  #11 
I recently found this forum and I am looking forward to talking to everyone.

I have a 30BR that I am not getting quite right. I will post some requests for help in the proper section.

Thanks for all of the help. (In advance).

Dwight
DSpringthorpe
Reply with quote  #12 
The system is asking for me to Please re-register (1-time) to post in New Forum. I think this is correct.

Have a nice day
RTex
Reply with quote  #13 
Howdy, all -

I'm new to all this, so I may ask some pretty basic questions as time goes by. Just (today) put my brand new Pac-Nor 6.5 X 55 Swede barrel on my beaten-up ol' Savage and may not be able to wait until daylight tomorrow to start break-in & load development. (Anyone want to volunteer to hold the flashlight beam on the target? ) I think this is going to be fun!

Just read the review of the RCBS Chargemaster. (Many thanks for that, BTW.) Between that and the 6mmBR performance and load info, it looks like you guys are going to cost me some money!

Rick
Moderator
Reply with quote  #14 
RTex,

Just this week we put a PacNor pre-fit superMatch on an old Savage. Barrel cleaned up in a jiff. No copper after 16 rounds and we just used wet patches.

With no load dev, just fire-forming loads of 29.5gr Varget, it was grouping 105gr Scenars in the mid-threes at 100, with tight 4-shot clusters in the lows 2s. This is about twice as accurate as the gun has ever been before.

Full report coming up soon.

gdragon34
Reply with quote  #15 
Saw your posting over at Snipers Hide. Can't wait to read your review. My Pac-Nor barrel is 10 feet away, anxiously waiting for an action to plug it in to.
RTex
Reply with quote  #16 
Quote:
Originally Posted by Moderator

With no load dev, just fire-forming loads of 29.5gr Varget, it was grouping 105gr Scenars in the mid-threes at 100, with tight 4-shot clusters in the lows 2s. This is about twice as accurate as the gun has ever been before.

Full report coming up soon.


Really looking forward to reading the report, Moderator!

Things look very promising with the 6.5 X 55 so far. Best group to date was .198" (3 shots) at 200 yards during break-in, but couldn't come anywhere close to duplicating that today. Been using 41 grains of IMR 4064 under a 142 gr SMK in Lapua brass for break-in, mainly because I have nearly 8 pounds of it. Next week, I plan to start load development using Reloder 22 & 139 grain scenars.

Any suggestions will be most appreciated!
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum