SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 |  New Posts
 
 
 


Reply
 
Author Comment
 
GLC
Reply with quote  #1 
Hi All,

I read sometime back about a guy that will "tune" a 10:10 scale, and I cannot find any info, does anybody have any info on this?

I have started usuing my 10:10 scale again as I am regulary reloading at a range where my digital scales are just too sensitive.

Any information would be appreciated.
regards
Gary
tackdriver
Reply with quote  #2 
GLC
I believe his name is Scott Parker. About 2 years ago he advertised that he tunes RCBS 10-10 and 505 scales. I sent my 10-10 scale to him and he worked his 'magic' (don't recall exactly what he did to it) and when I received it back, one granule of Varget would deflect the beam. Whatever 'certified' weight I placed on the scale (20, 40, 100gns.), it would show exactly that. Very pleased with his calibration! I recall he charged about $30 for his efforts. Well worth it. The 10-10 scale is the only scale I have ever used. Very pleased with it. I have loaded 1000's of extremely accurate rounds with it.
I am not sure how to contact him. Hope this helps.
Rod
GLC
Reply with quote  #3 
Many Thanks Rod, much appreciated, I will do a search in the forum and see if I can find him.

I agree the 10:10 is a great product and if it can be made more accurate even better!

regards
Gary
d6mmwea
Reply with quote  #4 
--------------------------------------------------------------------------------
Funny thing about gravity, everyone has laboratory grade gravity. How many people have laboratory grade electricity, or barrometric pressure? When you folks get tired of anti static this and line conditioner that and all the other band-aids for your high dollar electronic scales, contact me and I can tune your beam type scale or provide you with one. Works dead solid perfect down to a kernal.

Scott Parker
vld223@yahoo.com

Gary,
Here's the post. Saved it but never got around to using it.
Jeffvn
Reply with quote  #5 
Scott does good work; he fixed my 10-10 up and now it provides incrediby repeatable results.

Jeffvn
BoydAllen
Reply with quote  #6 
One more thing to help you when using a scale out of doors....

I designed a scale wind box ,with a sliding glass cover, that has a trickler inside. The trickler handle is on the outside, protruding through a closely fitting hole in the side of the box. I call it the "Missing Link" because it is the only additional piece of equipment that most of us need to load at the range with powders that cannot be thrown accurately using a measure. My friend Ed Hellam was kind enough to build us both one. Since then other friends have built them, and report that they perform exactly as intended. On a day when the wind cooperates (as determined by flags)one can cover a lot of ground insofar as load development is concerned. This is much more efficient than loading test loads at home.
milanuk
Reply with quote  #7 
Boyd,

Would you be so good as to maybe post a few pics of this box... I'm fixin' to send a 10.10 to Scott and would like a range-portable throw/trickle/weigh setup for use at the range. I can come up with my own design, and probably will 'customize' it a bit, but it'd be nice to see some examples.

Thanks,

Monte
BoydAllen
Reply with quote  #8 
I'll try to get it done in the next few days.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum

Powered by Website Toolbox - Create a Website Forum Hosting, Guestbook Hosting, or Website Chat Room for your website.