SHOOTERS'
FORUM


FORUM MEMBERS: GO to http://forum.AccurateShooter.com/. Log in with SAME User Name and SAME Password.

THIS FORUM HAS MOVED!!
GO to Forum.AccurateShooter.com

THIS FORUM is NOT ACTIVE. POSTING and THREAD CREATION are halted.

You can read all posts on NEW FORUM: Forum.AccurateShooter.com

 |  New Posts
 
 
 


Reply
 
Author Comment
 
stumack65
Reply with quote  #1 
I hate to do this but my wife doesn't like shooting her F-Class gun in a 7mm WSM so the barrel and bolt have to go. The barrel is in CM 1-9 twist that was finished to 28 inches. The barrel is full Dia at 1.200". The Chamber has a tight neck. The barrel was installed by Roger Burch from Roger's rifle shop. His work is outstanding. My wife just want a 6.5 instead. The barrel comes with a 700 SA bolt that was is fitted to the barrel. The bolt has a Sako extractor installed to fit the case head of the 7mm WSM. I am asking $375.00 for both the barrel and bolt. The barrel was broken the right way and the barrel only has 200 rounds though it. As you can see it was not shot much. Please email me or call me at 801-499-6608. Thanks for looking. This was pointed out to me. I am sorry that I mssed it. The Barrel was made by Mike Rock from Rock Creek barrels. I use Win brass and turn the necks to .012. If I have forgot anything else please let me know. Thanks everyone.

Thanks

Stumack65
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


You Can Help Support 6mmBR.com by Making a Small, Secure Donation.

Daily Shooter's Bulletin



Sponsored Searches Help Support this Forum

Powered by Website Toolbox - Create a Website Forum Hosting, Guestbook Hosting, or Website Chat Room for your website.